Maher I. Boulos Maher I. Boulos
Professeur et directeur du CRTP
Génie chimique - Faculté de génie
Université de Sherbrooke
Sherbrooke (Québec) CANADA J1K 2R1
Tél.: (819) 821-7168
Fax: (819) 821-7955
Courriel:  maher.boulos@usherbrooke.ca
Diplômes :  
  • B.Sc., University of Cairo (Égypte), 1963 
  • M.Sc.A., University of Waterloo (Ontario, Canada), 1968 
  • Ph.D., University of Waterloo (Ontario, Canada), 1972 
Axes de recherche :
  • Technologie des plasmas thermiques 
  • Dynamique des fluides et des particules 
  • Transfert de chaleur et de masse 
| Haut de la page |
Recherche actuelle : 
  • Chalumeaux à plasma inductif de haute performance

    • Le développement industriel de la technologie des plasmas dépend, en grande partie, de la disponibilité d'outillages fiables de haute performance pour la génération des plasmas. Un des volets importants de notre activité vise le développement de nouvelles conceptions de chalumeaux à plasma et l'établissement de facteurs d'échelle nous permettant de prédire leurs performances à haute puissance. Ceci implique autant les travaux de modélisation mathématique que l'expérimentation à différentes échelles de puissance au laboratoire.
  • Modélisation mathématique et diagnostic de plasmas et de particules

    • Nos travaux visent l'étude des phénomènes de turbulence dans les écoulements plasma et la modélisation des champs électromagnétiques et des champs de température, de mouvement et de concentration dans les chalumeaux à plasma inductif. Les diagnostics de particules en vol par anémométrie à laser et pyrométrie à deux longueurs d'ondes nous permettent de faire le lien entre les paramètres de particules durant les procédés de projection par plasma et la qualité de revêtements obtenus.
  • Traitement de matériaux et synthèse chimique

    • Une des applications les plus importantes de la technologie des plasmas se trouve au niveau de la fusion en vol des matériaux sous forme de poudres et de leur projection sur un substrat pour fins de formation de couches protectrices résistantes à l'usure et l'érosion, ou de barrières thermiques. La déposition réactive offre l'intérêt additionnel de permettre une transformation chimique des matériaux durant le procédé de projection. La formation de carbures de types WC ou TiC sont des exemples typiques.
    La technologie des plasmas thermiques est utilisée pour la synthèse de poudres ultrafines de céramique de haute pureté, telles que le SiC et le Si3N4. Nos travaux en cours visent aussi le développement de nouvelles technologies pour la destruction des déchets toxiques.

    | Haut de la page |

Articles publiés récemment :

  1. Blais, A., Proulx, P., and Boulos, M. I. Three-Dimensional Numerical Modelling of a Magnetically Deflected dc transferred arc in argon, Journal of Physics D: Applied Physics 36 , pp. 488-496 (2003).

  2. Burm, KTAL, Jodoin, B., Proulx, P., and Boulos, M. I. Modeling of Supersonic ICP argon-hydrogen expansion, Plasma Sources: Science & Technologie 12 , pp. 362-371 (2003).

  3. Kouprine, A., Gitzhofer, F., Boulos, M. I., and Fridman, A. Polymerlike C:H Thin Film Coating of Nanopowders in Capacitively Coupled RF Discharge, Journal of Plasma Chemistry and Plasma Processing 23 [4](2003).

  4. Selezneva, S., Boulos, M. I., Letourneur, K. G. Y., Van Hest, M. F. A. M., Van de Sanden, M. C. M., and Schram, D. C. Supersonically expanding cascaded arc plasma properties:  comparison of Ne, Ar and Xe, Plasma Sources Science Technology 12 , pp. 107-118 (2003).

  5. Xue, S., Proulx, P., and Boulos, M. I. Effect of coil angle in an inductively couple plasma torch: A novel two-dimensional model, Plasma Chem.Plasma Processing 23 [2], pp. 245-263 (2003).

  6. Sekiguchi, H., Bonneau, M. E., Gitzhofer, F., Boulos, M. I., and Munz, R. J. Preparation of Ag/Al2O3 Nanocomposite Using Suspension Plasma Spraying:  A Feasibility Study, Transaction of the Materials Research Society of Japan 27 [1], pp. 59-61 (2002).

  7. Selezneva, S., Sember, V., Gravelle, D. V., and Boulos, M. I. Spectroscopic Validation oft the Supersonic Plasma Jet Model, Journal of Physics D: Applied Physics 35 [12], pp. 1338-1349 (2002).

  8. Selezneva, S., Boulos, M. I., Van de Sanden, M. C. M., Engeln, R, and Schram, D. C. Stationary Supersonic Plasma Expansion:  Continuum Fluid Mechanics versus Direct Simulation Monte Carlo Method, Journal of Physics D: Applied Physics 35 [12], pp. 1362-1372 (2002).

  9. Xue, S., Proulx, P., and Boulos, M. I. Modelling the effect of ferrite on an inductively coupled plasma torch. Part 2: Finite ferrite permeability, Journal of Physics D: Applied Physics 35 , pp. 1131-1140 (2002).

  10. Xue, S., Proulx, P., and Boulos, M. I. Modelling the effect of ferrite on an inductively coupled plasma torch. Part 1: Infinite ferrite permeability, Journal of Physics D: Applied Physics 35 , pp. 1123-1130 (2002).

  11. Boulos, M. I., "Visualization and Diagnostics of Thermal Plasma Flows", Journal of Visualization, 4 (1), pp.19-28 (2001)  

  12. Jiang, X. L. and Boulos, M. I., "Effect of Process Parameters on Induction Plasma Reactive Deposition of Tungsten Carbide From Tungsten Metal Powder", Trans.Nonferrous Met.Soc.China, 11 (5), pp.639-643 (2001)

  13. Jiang, X. L. and Boulos, M. I., "Induction Plasma Reactive Deposition of Tungsten Carbide From Tungsten Metal Powder", ACTA Metallurgical Sinica, 14 (5), pp.352-358 (2001)
  14. Jiang, X. L. and Boulos, M. I., "Particle Melting, Flattening, and Stacking Behaviors in Induction Plasma Deposition of Tungsten", Trans.Nonferrous Met.Soc.China, 11 (6), pp.811-816 (2001)
  15. Selezneva, S. and Boulos, M. I., "Supersonic Induction Plasma Jet Modelling", Nuclear Inst.& Methods in Phys.Reseach, B180, pp.306-311 (2001)
  16. Selezneva, S., Rajabian, M., Gravelle, D. V., and Boulos, M. I., "Study of the Structure and Deviation from Equilibrium in Direct Current Supersonic Plasma Jets", J.Phys.D: Appl.Physics, 34, pp.2862-2874 (2001)
  17. Wilden, J., Wank, A., Asmann, M., Heberlein, J., Boulos, M. I., and Gitzhofer, F., "Synthesis of Si-C-N coatings by thermal Plasmajet chemical vapour deposition
    applying liquid precursors"    , Applied Organometallic Chemistry, 15 (10), pp.841-857 (2001)
  18. Xue, S., Proulx, P., and Boulos, M. I., "Extended - Field Electromagnetic Model for the Inductively Coupled Plasma", J.Phys.D: Appl.Physics,  (34), pp.1897-1906 (2001)
  19. Bouyer, E., Gitzhofer, F., and Boulos, M. I., "Morphological Study of Hydroxyapatite Nanocrystal  Suspension", Journal of Materials Science: Materials in Medicine, 11, pp.523-531 (2000)
  20. Gitzhofer, F., Boulos, M. I., Heberlein, J., Henne, R., Ishigaki, H., and Yoshida, T., "Integrated Fabrication Processes for Solid-oxide Fuel Cells using Thermal Plasma Spray Technology", MRS Bulletin, 25 (7), pp.38-42 (2000)
  21. Merkhouf, A. and Boulos, M. I., "Distributed Energy Analysis for an Integrated Radio Frequency Induction Plasma System", J.Phys.D: Appl.Physics, 33, pp.1581-1587 (2000)
  22. Müller, M., Heinmann, R. B., Gitzhofer, F., Boulos, M. I., and Schwarz, K., "Radio Frequency Plasma Processing to Produce Chromium Sputter Targets", J.Therm.Spray Tech., 9 (4), pp.488-493 (2000)
  23. Ye, R., Proulx, P., and Boulos, M. I., "Particle Turbulent Dispersion and Loading Effects in an Inductively Coupled Radio Frequency Plasma", J.Phys.D: Appl.Physics, 33, pp.2154-2162 (2000)
  24. Henne, R., Müller, M., Pross, E., Schiller, G., Gitzhofer, F., and Boulos, M. I., "Near-Net-Shape Forming of Metallic Bipolar Plates for Planar Solid Oxide Fuel Cells by Induction Plasma Spraying", J.Therm.Spray Tech., 8 (1), pp.110-116 (1999)
  25. Yargeau, V., Soucy, G., and Boulos, M. I., "The Treatment of a Water-Based Toxic Waste Using Induction Plasma Technology", J.Plasma Chem.and Plasma Proces., 19 (2), pp.327-340 (1999)
  26. Ye, R., Proulx, P., and Boulos, M. I., "Turbulence Phenomena in the Radio Frequency Induction Plasma Torch", Int.J.Heat Mass Trans., 42 (9), pp.1585-1595 (1999)
  27. Fan, X., Gitzhofer, F., and Boulos, M. I., "Investigation of Alumina Splats Formed in the Induction Plasma Process", J.Therm.Spray Tech., 7 (2), pp.197-204 (1998) 
  28. Fan, X., Gitzhofer, F., and Boulos, M. I., "Statistical Design of Experiments for the Spheroidization of Powdered Alumina by Induction Plasma Processing", J.Therm.Spray Tech., 7 (2), pp.247-253 (1998) 
  29. Merkhouf, A. and Boulos, M.I., "Integrated Model for the Radio Frequency Induction Plasma Torch and Power Supply System", Plasma Sources Sci. Technol., 7, pp. 599-606 (1998). 
  30. Rahmane, M., Soucy, G., Boulos, M. I., and Henne, R., "Fluid Dynamics of D.C. Plasma Jets and their Influence on the Characteristics of Plasma Sprayed Coatings", J.Therm.Spray Tech., 7 (3), pp.349-356 (1998) 
  31. Rahmane, M., Soucy, G., and Boulos, M. I., "Similarity Analysis and Scale-Up Criteria for Thermal Plasma Jets", J.High Temp.Mat.Proces., 2 (2), pp.177-193 (1998) 
  32. Soucy, G., Bergeron, E., and Boulos, M. I., "Design of an Induction Plasma Reactor for the Reforming of Aromatic Liquid Wastes" , J.High Temp.Mat.Proces., 2 (2), pp.195-206 (1998) 
  33. Voyer, J., Gitzhofer, F. and Boulos, M.I. "Study of the Performance of TBC Under Thermal Cycling Conditions Using an Acoustic Emission Rig", J Therm Spray Tech, 7 (2), pp. 181-190 (1998) 
  34. Boulos, M.I. "The Inductively Coupled Radio Frequency Plasma", J High Temp Mat Proces, 1 pp. 17-39 (1997)  
  35. Bouyer, E., Gitzhofer, F. and Boulos, M.I. "Suspension Plasma Spraying for for Hydroxyapatite Powder Preparation by R.F. Plasma", IEEE Trans on Plasma Sci, 25 (5), pp. 1066-1072 (1997)  
  36. Bouyer, E., Gitzhofer, F. and Boulos, M.I. "The Suspension Plasma Spraying of Bioceramics by Induction Plasma", J Mat Sci, 49 (2), pp. 58-62 (1997)  
  37. Cao, M., Gitzhofer, F., Gravelle, D.V., Henne, R. and Boulos, M.I. "A Torch Nozzle Design to Improve Plasma Spraying Techniques", Plasma Sources Sci Technol, 6 pp. 39-45 (1997)  
  38. Guo, J.Y., Gitzhofer, F. and Boulos, M.I. "Effects of Process Parameters on Ultrafine SiC Synthesis Using Induction Plasma", Plasma Chem Plasma Proces, 17 (2), pp. 219-249 (1997)  
  39. Guo, J.Y., Gitzhofer, F., Boulos, M.I., Ishigaki, T. and Mieno, M. "Study of the Sintering Properties of Plasma Synthesized Ultrafine SiC Powders", J Mat Sci, 32 pp. 5257-5269 (1997)

  Conférences récentes :

  1. Branland N., Meillot E., Fauchais P., Vardelle A., Gitzhofer F., and Boulos M.I. "Study of RF and DC plasma-sprayed TiO2 coatings: Electrical properties and microstructure", International Thermal Spray Conference (ITSC 2003), Orlando (Florida), (2003)

  2. Branland N., Meillot E., Fauchais P., Vardelle A., Boulos M.I., Gitzhofer F., Drouin D., and Magny P. "Relationships Between Induction Plasma Spraying Parameters and TiO2 Particle Characteristics at Impact", 16th International Symposiun on Plasma Chemistry (ISPC-16), Taormina (Italy), (2003)

  3. Kouprine A., Gitzhofer F., Boulos M.I., and Fridman A. "Kinetics of C:H Film Coating of Nanopowders in RF Discharge in  Hydrocarbon Gases", 16th International Symposiun on Plasma Chemistry (ISPC-16), Taormina (Italy), (2003)

  4. Kouprine A., Gitzhofer F., and Boulos M.I. "Polymerlike C:H Thin Film Coating of SiO2 Nanopowders in Capacitively Coupled RF Discharge", International Thermal Spray Conference (ITSC 2003), Orlando (Florida), (2003)

  5. Léveillé V., Boulos M.I., and Gravelle D.V. "Diagnostic of Supersonic High Frequency (HF) Plasma Flow", 16th International Symposiun on Plasma Chemistry (ISPC-16), Taormina (Italy), (2003)

  6. Léveillé V., Gravelle D.V., and Boulos M.I. "Diagnostic study of supersonic plasma flows using enthalpy probe, schlieren and high speed photography", International Thermal Spray Conference (ITSC 2003), Orlando (Florida), (2003)

  7. Renouard-Vallet G., Gitzhofer F., Boulos M.I., Fauchais P., Vardelle M., and Bianchi L. "Optimization of axial injection conditions  in a supersonic induction plasma torch - Application to SOFCS", International Thermal Spray Conference (ITSC 2003), Orlando (Florida), (2003)

  8. Robin P., Gitzhofer F., and Boulos M.I. "The use of acoustic emission techniques for characterizing failure of mechanism of thermal barrier coatings under thermal cycling conditions", International Thermal Spray Conference (ITSC 2003), Orlando (Florida), (2003)

  9. Robin P., Gitzhofer F., and Boulos M.I. "Finite elements modelling of TBC's under thermal cycling conditions ", International Thermal Spray Conference (ITSC 2003), Orlando (Florida), (2003)

  10. Selezneva S., Weber J., and Boulos M.I. "Heat Transfer in under-expanded supersonic plasma jets impinging on a flat plate", 16th International Symposiun on Plasma Chemistry (ISPC-16) , Taormina (Italy), (2003)

  11. Selezneva S., Sember V., Rajabian M., Gravelle D.V., and Boulos M.I. "Comparative analysis of supersonic plasma jets formed by DC arc and ICP torch", 16th International Symposiun on Plasma Chemistry (ISPC-16), Taormina (Italy), (2003)

  12. Weber J., Selezneva S., and Boulos M.I. "Modeling and diagnostics of the supersonic impinging induction plasma jet", International Thermal Spray Conference (ITSC 2003), Orlando (Florida), (2003)

  13. Xue S., Proulx P., and Boulos M.I. "Turbulence modelling of inductively coupled plasma flows", International Thermal Spray Conference (ITSC 2003), Orlando (Florida), (2003)

  14. Xue S., Proulx P., and Boulos M.I. "Local Thermodynamic Equilibrium Condition for Inductive Plasma", 16th International Symposiun on Plasma Chemistry (ISPC-16), Taormina (Italy), (2003)

  15. Boulos M.I. "Induction Plasma Synthesis and Processing of Nanostructured Materials", Innovative Materials Processing by Controlling Chemical Reaction Field (IMP 2002), Miyagi (Japan), pp. 21-28 (2002)

  16. Blais A., Proulx P., and Boulos M.I. "Modelling of a d.c. Transferred Arc in the Presence of an External Magnetic Field", 15th International Symposium on Plasma Chemistry (ISPC 15) , Orléans (France), III, pp.  1009-1014 (2001)

  17. Bonneau M.E., Gitzhofer F., Boulos M.I., and Lasia A. "SOFC Electrolytes Synthesis by Induction Plasma Spraying ", 15th International Symposium on Plasma Chemistry (ISPC 15), Oléans (France), VII, pp. 2823-2830 (2001)

  18. Bonneau M.E., Gitzhofer F., and Boulos M.I. "RF Induction Plasma Spraying of Double Doped Ceria Electrolyte Layer for SOFC ", International Thermal Spray Conference (ITSC 2001),  (Singapore), (2001)

  19. Bonneau M.E., Gitzhofer F., and Boulos M.I. "Double Doped Ceria Electrolyte Synthesized by Solution Plasma Spraying with Induction Plasma Technology", International Thermal Spray Conference (ITSC 2001),  (Singapore), pp. 61-68 (2001)

  20. Branland N., Gitzhofer F., Boulos M.I., Meillot E., Vardelle A., and Fauchais P. "Electrical Properties of Plasma-Sprayed TiO2 Coatings", 15th International Symposium on Plasma Chemistry (ISPC 15), Oléans (France), pp. 303-310 (2001)

  21. Dignard N.M. and Boulos M.I. "Transient Heating and Melting of Porous particles under plasma conditions", International Thermal Spray Conference (ITSC 2001),  (Singapore), (2001)

  22. Kouprine A., Gitzhofer F., Boulos M.I., and Fridman A. "Graphite Coating of Nanoparticles in Capacitively Coupled RF Discharge", 15th International Symposium on Plasma Chemistry (ISPC 15), Oléans (France), pp. 335-342 (2001)

  23. Léveillé V. and Boulos M.I. "Enthalpy probe diagnostic in supersonic plasma flows", International Thermal Spray Conference (ITSC 2001),  (Singapore), (2001)

  24. Robin P., Gitzhofer F., and Boulos M.I. "AE Monitoring of Thermally Cycled TBC", International Thermal Spray Conference (ITSC 2001),  (Singapore), (2001)

  25. Selezneva S., Sember V., Gravelle D.V., and Boulos M.I. "Structure and LTE analysis of direct current supersonic plasma jets", 15th International Symposium on Plasma Chemistry (ISPC 15), Orléans (France), pp. 1203-1209 (2001)

  26. Selezneva S. and Boulos M.I. "Mathematical Modeling of the  Supersonic Induction Plasma Jet", 15th International Symposium on Plasma Chemistry (ISPC 15), Oléans (France), pp. 1197-1202 (2001)

  27. Sember V., Gravelle D.V., and Boulos M.I. "LTE Analysis of Supersonic Induction Plasma Jets", International Thermal Spray Conference (ITSC 2001),  (Singapore), (2001)

  28. Sember V., Gravelle D.V., and Boulos M.I. "Spectroscopic study of supersonic induction plasma jet with convergentdivergent (Laval) nozzle", 15th International Symposium on Plasma Chemistry (ISPC 15), Orléans (France), (2001)

  29. Xue S., Proulx P., and Boulos M.I. "Three-dimensional coil effects in induction plasma flow modeling", 15th International Symposium on Plasma Chemistry (ISPC 15), Orléans (France), pp. 1221-1226 (2001)

  30. Xue S., Proulx P., and Boulos M.I. "Extended field Model for the Induction Plasma Discharge", 15th International Symposium on Plasma Chemistry (ISPC 15), Orléans (France), pp. 1227-1232 (2001)

  31. Blais A., Merkhouf A., Proulx P., and Boulos M.I. "Modelling of a transferred arc in presence of an external magnetic field", 27th IEEE International Conference on Plasma Science, New Orleans (Louisiana, USA), (2000)
  32. Bonneau M.E., Gitzhofer F., and Boulos M.I. "SOFC/CeCO2 Doped Electrollyte Deposition Using Suspension Plasma Spraying", International Thermal Spray Conference and Exposition (ITSC'2000), Montreal (Canada), (2000)
  33. Dignard N.M. and Boulos M.I. "Powder Spheroidization Using Induction Plasma Technology", International Thermal Spray Conference and Exposition (ITSC'2000), Montréal (Canada), (2000)
  34. Merkhouf A., Proulx P., and Boulos M.I. "Mathematical modeling of the induction plasma torch and its associated MHD fields using the FLUENT code", International Thermal Spray Conference and Exposition (ITSC'2000), Montréal (Canada), (2000)
  35. Merkhouf A., Proulx P., and Boulos M.I. "Mathematical modeling of the induction plasma torch and its associated MHD fields using the FLUENT code", 27th IEEE International Conference on Plasma Science, New Orleans (Louisiana, USA), (2000)
  36. Rahmane M., Léveillé V., and Boulos M.I. "Enthalpy Probe Performance in Supersonic Plasma Flows", International Thermal Spray Conference and Exposition (ITSC'2000), Montréal (Canada), (2000)
  37. Robin P., Gitzhofer F., and Boulos M.I. "Acoustic Emission Technics for the Non-Destruction Evaluation of TBCs Under Thermal Cycling Conditions", International Thermal Spray Conference and Exposition (ITSC'2000), Montreal (Canada), (2000)
  38. Schwenk A., Sember V., Gravelle D.V., Boulos M.I., and Nutsch G. "Enthalpy Probe Measurements in a Supersonic Induction Plasma Jet", Workshop Plasmatechnik, Ilmenau (GERMANY), pp. 36-43 (2000)
  39. Sember V., Gravelle D.V., and Boulos M.I. "LTE Analysis of Supersonic Induction Plasma Jets", International Thermal Spray Conference and Exposition (ITSC'2000), Montreal (Canada), (2000)
  40. Sember V., Schwenk A., Gravelle D.V., and Boulos M.I. "Local Thermodynamic Equilibrium Analysis of the Supersonic Induction Plasma Jet", 27th IEEE International Conference on Plasma Science, New Orleans (Louisiana, USA), (2000)
  41. Boulos M.I. "Diagnostics of Thermal Plasmas", Frontiers in Low Temperature Plasma Diagnostics III , Saillon (Switzerland), pp. 7-8 (1999)
  42. Boulos M.I. "Induction Plasma Torch Development and Diagnostics", United Thermal Spray Conference & Exposition (UTSC '99), Düsseldorf (Germany), (1999)
  43. Dignard N.M. and Boulos M.I. "Sphericity Analysis Method for the Induction Plasma Processing of Powders", 14th International Symposium on Plasma Chemistry - ISPC'14, Prague (Czech Republic), (1999)
  44. Fortin L., Soucy G., Kasireddy V., Bernier J.-L., Boulos M.I., and Kimmerle F.M. "The Use of Thermal Plasma for Wastewater Treatment", 14th International Symposium on Plasma Chemistry - ISPC'14, Prague (Czech Republic), pp. 2387-2392 (1999)
  45. Gitzhofer F., Boulos M.I., Schiller G., and Henne R. "Materials Synthesis Using Induction Plasma", UTSC'99 - 2nd United Thermal Spray Conference & Exposition - Coating in Practice, Düsseldorf (Germany), (1999)
  46. Hollenstein M., Rahmane M., and Boulos M.I. "Aerodynamic Study of the Supersonic Induction Plasma Jet", 14th International Symposium on Plasma Chemistry - ISPC'14, Prague (Czech Republic), (1999)
  47. Hollenstein M., Rahmane M., and Boulos M.I. "Enthalpy Probe Diagnostic Study of the Supersonic Induction Plasma Jet", ICHMT '99, Antalya (TURQUY), (1999)
  48. Mailhot K., Gitzhofer F., and Boulos M.I. "Plasma Deposition of Dense Ceramic Coatings Using Supersonic Induction Plasma", UTSC'99 - 2nd United Thermal Spray Conference & Exposition - Coating in Practice, Düsseldorf (Germany), (1999)
  49. Merkhouf A. and Boulos M.I. "Experimental Validation for an Integrated Model of the Induction Plasma Generation System", 14th International Symposium on Plasma Chemistry - ISPC'14, Prague (Czech Republic), (1999)
  50. Theophile E., Gitzhofer F., and Boulos M.I. "Manufacturing of Solid Oxide Fuel Cells Components by Induction Plasma Spraying", UTSC'99 - 2nd United Thermal Spray Conference & Exposition - Coating in Practice, Düsseldorf (Germany), (1999)
  51. Theophile E., Gitzhofer F., and Boulos M.I. "Supersonic Induction Plasma Spraying of Yttria Stabilized Zirconia Coatings", 14th International Symposium on Plasma Chemistry - ISPC'14, Prague (Czech Republic), (1999)
  52. Yargeau V., Soucy G., and Boulos M.I. "Decomposition of Aqueous Liquid Wastes Using an Induction Thermal Plasma", 14th International Symposium on Plasma Chemistry - ISPC'14, Prague (Czech Republic), pp. 2519-2524 (1999)
  53. Ye R., Proulx P., and Boulos M.I. "Investigation of Turbulence Phenomena in the R.F. Plasma Torch", 14th International Symposium on Plasma Chemistry - ISPC'14, Prague (Czech Republic), (1999)
  54. Dignard N.M. and Boulos M.I. "Metallic and Ceramic Powder Spheroidization by Induction Plasmas", International Thermal Spray Conference (ITSC'98), Nice (France), (1998)
  55. Gitzhofer F., Mailhot K., Boulos M.I., Jung I.H., Lee J.S., and Park H.S. "Fabrication of Simulated Nuclear Fuel Pellets by Induction Plasma Deposition", International Thermal Spray Conference (ITSC'98), Nice (France), 2, pp. 1283-1288 (1998)
  56. Gitzhofer F., Boulos M.I., Bouyer E., Müller M., Schiller G., and Henne R. "Induction Plasma Technology and Materials Synthesis", 98' Workshop PLASMATECHNIK, Thüringen (Germany), (1998)
  57. Mailhot K., Gitzhofer F., and Boulos M.I. "Absolute Coating Porosity Measurement Using Image Analysis", International Thermal Spray Conference (ITSC'98), Nice (France), 1, pp. 917-922 (1998)
  58. Mailhot K., Gitzhofer F., and Boulos M.I. "Supersonic Induction Plasma Spraying of Yttria Stabilized Zirconia Films", International Thermal Spray Conference (ITSC'98), Nice (France), 2, pp. 1419-1424 (1998)
  59. Müller M., Henne R., Schiller G., Boulos M.I., Gitzhofer F., and Heinmann R.B. "Radio-Frequency Suspension Plasma Spraying of Cobalt Spinel Anodes for Alkaline Water Electrolysis", International Thermal Spray Conference (ITSC'98), Nice (France), 2, pp. 1523-1527 (1998)
  60. Yargeau V., Soucy G., and Boulos M.I. "Treatment of Aqueous Liquid Waste in an Induction Plasma Reactor", TPP-5, St-Petersburg (Russia), (1998)
| Haut de la page |
[Contactez-nous] [Liens WWW] [English Version]
[Recherche] [Collaborations] [Publications] [Professeurs] [Étudiants] [Techniciens] [Alumni] [Archives]